Description
EP-LMF-KP
EVER POWER supplies this pilot flanged linear bearings family for assembly stations and repeatable plate-mounted positions. Start the selection with pilot geometry, flange pattern, bore and body length so the quotation is tied to the actual machine interface.
Nominal range: Ø6-Ø60 mm. Configuration: pilot-location round and square flange types.
Technical profile
| Parameter | Value |
|---|---|
| Series identity | EP-LMF-KP |
| Nominal range | Ø6-Ø60 mm |
| Available configuration | pilot-location round and square flange types |
| Mechanical interface | locating pilot plus bolt-on flange |
| Fit / tolerance note | measure pilot diameter/depth and bolt circle before ordering |
| Typical applications | assembly stations and repeatable plate-mounted positions |
| RFQ selection inputs | pilot geometry, flange pattern, bore and body length |
Representative EP- models
The EP- prefix is the public sales identity used on this site; the engineering series code follows it for cross-reference.
| EP- model | Nominal family range | Configuration note |
|---|---|---|
| EP-LMFP8UU | Ø6-Ø60 mm | pilot-location round and square flange types |
| EP-LMKP12UU | Ø6-Ø60 mm | pilot-location round and square flange types |
| EP-LMFP16UU | Ø6-Ø60 mm | pilot-location round and square flange types |
| EP-LMKP20UU | Ø6-Ø60 mm | pilot-location round and square flange types |
| EP-LMFP25UU | Ø6-Ø60 mm | pilot-location round and square flange types |
| EP-LMKP30UU | Ø6-Ø60 mm | pilot-location round and square flange types |
Selection and replacement notes
measure pilot diameter/depth and bolt circle before ordering
For replacement work, send the old code plus a photo or dimensional sketch. For a new design, send motion duty, mounting envelope and the selection inputs above.
Dimensional reference
What to verify
Check the shaft or rail size first, then the mounting envelope. On flanged and housed products, bolt pattern and center height can be just as important as the nominal bore.
Related components
Common companions include precision linear shafts, shaft supports or a housed/rail unit. Confirm mating dimensions before treating related parts as a matched set.
Need a dimensional check or quote?
Send the model, quantity, interface dimensions and application.
