Description
EP-LMF-KC
EVER POWER supplies this center flanged linear bearings family for symmetric mounting plates and special machine housings. Start the selection with flange axial location, bolt pattern and body protrusion so the quotation is tied to the actual machine interface.
Nominal range: Ø6-Ø60 mm. Configuration: center-flange round and square variants.
Technical profile
| Parameter | Value |
|---|---|
| Series identity | EP-LMF-KC |
| Nominal range | Ø6-Ø60 mm |
| Available configuration | center-flange round and square variants |
| Mechanical interface | flange located near body center |
| Fit / tolerance note | confirm axial flange position as well as bore and OD |
| Typical applications | symmetric mounting plates and special machine housings |
| RFQ selection inputs | flange axial location, bolt pattern and body protrusion |
Representative EP- models
The EP- prefix is the public sales identity used on this site; the engineering series code follows it for cross-reference.
| EP- model | Nominal family range | Configuration note |
|---|---|---|
| EP-LMFC8UU | Ø6-Ø60 mm | center-flange round and square variants |
| EP-LMKC12UU | Ø6-Ø60 mm | center-flange round and square variants |
| EP-LMFC16UU | Ø6-Ø60 mm | center-flange round and square variants |
| EP-LMKC20UU | Ø6-Ø60 mm | center-flange round and square variants |
| EP-LMFC25UU | Ø6-Ø60 mm | center-flange round and square variants |
| EP-LMKC30UU | Ø6-Ø60 mm | center-flange round and square variants |
| EP-LMFC40UU | Ø6-Ø60 mm | center-flange round and square variants |
Selection and replacement notes
confirm axial flange position as well as bore and OD
For replacement work, send the old code plus a photo or dimensional sketch. For a new design, send motion duty, mounting envelope and the selection inputs above.
Dimensional reference
What to verify
Check the shaft or rail size first, then the mounting envelope. On flanged and housed products, bolt pattern and center height can be just as important as the nominal bore.
Related components
Common companions include precision linear shafts, shaft supports or a housed/rail unit. Confirm mating dimensions before treating related parts as a matched set.
Need a dimensional check or quote?
Send the model, quantity, interface dimensions and application.
