Description
EP-LM
EVER POWER supplies this standard linear bearings family for 3D printers, compact CNC, fixtures and general automation. Start the selection with bore, OD, length, seal/open/adjustable form and shaft fit so the quotation is tied to the actual machine interface.
Nominal range: Ø3-Ø100 mm. Configuration: UU sealed; OP open; AJ adjustable on supported sizes.
Technical profile
| Parameter | Value |
|---|---|
| Series identity | EP-LM |
| Nominal range | Ø3-Ø100 mm |
| Available configuration | UU sealed; OP open; AJ adjustable on supported sizes |
| Mechanical interface | cylindrical metric housing and round shaft |
| Fit / tolerance note | nominal shaft convention: h7; confirm the ordered shaft and housing fit for the selected model |
| Typical applications | 3D printers, compact CNC, fixtures and general automation |
| RFQ selection inputs | bore, OD, length, seal/open/adjustable form and shaft fit |
Representative EP- models
The EP- prefix is the public sales identity used on this site; the engineering series code follows it for cross-reference.
| EP- model | Nominal family range | Configuration note |
|---|---|---|
| EP-LM3 | Ø3-Ø100 mm | UU sealed; OP open; AJ adjustable on supported sizes |
| EP-LM5UU | Ø3-Ø100 mm | UU sealed; OP open; AJ adjustable on supported sizes |
| EP-LM8UU | Ø3-Ø100 mm | UU sealed; OP open; AJ adjustable on supported sizes |
| EP-LM12UU | Ø3-Ø100 mm | UU sealed; OP open; AJ adjustable on supported sizes |
| EP-LM16UU | Ø3-Ø100 mm | UU sealed; OP open; AJ adjustable on supported sizes |
| EP-LM25UU | Ø3-Ø100 mm | UU sealed; OP open; AJ adjustable on supported sizes |
| EP-LM40UU | Ø3-Ø100 mm | UU sealed; OP open; AJ adjustable on supported sizes |
| EP-LM60UU | Ø3-Ø100 mm | UU sealed; OP open; AJ adjustable on supported sizes |
| EP-LM100UU | Ø3-Ø100 mm | UU sealed; OP open; AJ adjustable on supported sizes |
Selection and replacement notes
nominal shaft convention: h7; confirm the ordered shaft and housing fit for the selected model
For replacement work, send the old code plus a photo or dimensional sketch. For a new design, send motion duty, mounting envelope and the selection inputs above.
Dimensional reference
What to verify
Check the shaft or rail size first, then the mounting envelope. On flanged and housed products, bolt pattern and center height can be just as important as the nominal bore.
Related components
Common companions include precision linear shafts, shaft supports or a housed/rail unit. Confirm mating dimensions before treating related parts as a matched set.
Need a dimensional check or quote?
Send the model, quantity, interface dimensions and application.
