Description
EP-LMEF-KC
EVER POWER supplies this european center flanged linear bearings family for European automation with a centered mounting plane. Start the selection with European envelope, center-flange location and mounting screws so the quotation is tied to the actual machine interface.
Nominal range: Ø8-Ø60 mm. Configuration: European center-flange variants.
Technical profile
| Parameter | Value |
|---|---|
| Series identity | EP-LMEF-KC |
| Nominal range | Ø8-Ø60 mm |
| Available configuration | European center-flange variants |
| Mechanical interface | European metric center-flange envelope |
| Fit / tolerance note | match axial flange position and LME-family interfaces |
| Typical applications | European automation with a centered mounting plane |
| RFQ selection inputs | European envelope, center-flange location and mounting screws |
Representative EP- models
The EP- prefix is the public sales identity used on this site; the engineering series code follows it for cross-reference.
| EP- model | Nominal family range | Configuration note |
|---|---|---|
| EP-LMEFC12UU | Ø8-Ø60 mm | European center-flange variants |
| EP-LMEKC16UU | Ø8-Ø60 mm | European center-flange variants |
| EP-LMEFC20UU | Ø8-Ø60 mm | European center-flange variants |
| EP-LMEKC25UU | Ø8-Ø60 mm | European center-flange variants |
| EP-LMEFC30UU | Ø8-Ø60 mm | European center-flange variants |
| EP-LMEFC40UU | Ø8-Ø60 mm | European center-flange variants |
Selection and replacement notes
match axial flange position and LME-family interfaces
For replacement work, send the old code plus a photo or dimensional sketch. For a new design, send motion duty, mounting envelope and the selection inputs above.
Dimensional reference
What to verify
Check the shaft or rail size first, then the mounting envelope. On flanged and housed products, bolt pattern and center height can be just as important as the nominal bore.
Related components
Common companions include precision linear shafts, shaft supports or a housed/rail unit. Confirm mating dimensions before treating related parts as a matched set.
Need a dimensional check or quote?
Send the model, quantity, interface dimensions and application.
