Description
EP-LME-LUU
EVER POWER supplies this long type european linear bearings family for packaging machinery and machine modules designed around a long LME envelope. Start the selection with bore, OD, body length, housing length and fit so the quotation is tied to the actual machine interface.
Nominal range: Ø8-Ø60 mm. Configuration: long European-pattern body.
Technical profile
| Parameter | Value |
|---|---|
| Series identity | EP-LME-LUU |
| Nominal range | Ø8-Ø60 mm |
| Available configuration | long European-pattern body |
| Mechanical interface | extended European metric housing |
| Fit / tolerance note | confirm shaft/housing fit and rear-body clearance |
| Typical applications | packaging machinery and machine modules designed around a long LME envelope |
| RFQ selection inputs | bore, OD, body length, housing length and fit |
Representative EP- models
The EP- prefix is the public sales identity used on this site; the engineering series code follows it for cross-reference.
| EP- model | Nominal family range | Configuration note |
|---|---|---|
| EP-LME8LUU | Ø8-Ø60 mm | long European-pattern body |
| EP-LME12LUU | Ø8-Ø60 mm | long European-pattern body |
| EP-LME16LUU | Ø8-Ø60 mm | long European-pattern body |
| EP-LME20LUU | Ø8-Ø60 mm | long European-pattern body |
| EP-LME25LUU | Ø8-Ø60 mm | long European-pattern body |
| EP-LME30LUU | Ø8-Ø60 mm | long European-pattern body |
| EP-LME40LUU | Ø8-Ø60 mm | long European-pattern body |
| EP-LME60LUU | Ø8-Ø60 mm | long European-pattern body |
Selection and replacement notes
confirm shaft/housing fit and rear-body clearance
For replacement work, send the old code plus a photo or dimensional sketch. For a new design, send motion duty, mounting envelope and the selection inputs above.
Dimensional reference
What to verify
Check the shaft or rail size first, then the mounting envelope. On flanged and housed products, bolt pattern and center height can be just as important as the nominal bore.
Related components
Common companions include precision linear shafts, shaft supports or a housed/rail unit. Confirm mating dimensions before treating related parts as a matched set.
Need a dimensional check or quote?
Send the model, quantity, interface dimensions and application.
