Description
EP-LMBS
EVER POWER supplies this inch size stainless linear bearings family for US-built equipment and legacy imperial machinery. Start the selection with inch bore, OD, length, seal, material and legacy envelope so the quotation is tied to the actual machine interface.
Nominal range: 1/4 in-2 in. Configuration: inch-size stainless family.
Technical profile
| Parameter | Value |
|---|---|
| Series identity | EP-LMBS |
| Nominal range | 1/4 in-2 in |
| Available configuration | inch-size stainless family |
| Mechanical interface | imperial shaft and housing dimensions |
| Fit / tolerance note | use inch and millimeter dimensions during retrofit checks |
| Typical applications | US-built equipment and legacy imperial machinery |
| RFQ selection inputs | inch bore, OD, length, seal, material and legacy envelope |
Representative EP- models
The EP- prefix is the public sales identity used on this site; the engineering series code follows it for cross-reference.
| EP- model | Nominal family range | Configuration note |
|---|---|---|
| EP-LMBS4 | 1/4 in-2 in | inch-size stainless family |
| EP-LMBS6 | 1/4 in-2 in | inch-size stainless family |
| EP-LMBS8UU | 1/4 in-2 in | inch-size stainless family |
| EP-LMBS10UU | 1/4 in-2 in | inch-size stainless family |
| EP-LMBS12UU | 1/4 in-2 in | inch-size stainless family |
| EP-LMBS16UU | 1/4 in-2 in | inch-size stainless family |
| EP-LMBS24UU | 1/4 in-2 in | inch-size stainless family |
| EP-LMBS32UU | 1/4 in-2 in | inch-size stainless family |
Selection and replacement notes
use inch and millimeter dimensions during retrofit checks
For replacement work, send the old code plus a photo or dimensional sketch. For a new design, send motion duty, mounting envelope and the selection inputs above.
Dimensional reference
What to verify
Check the shaft or rail size first, then the mounting envelope. On flanged and housed products, bolt pattern and center height can be just as important as the nominal bore.
Related components
Common companions include precision linear shafts, shaft supports or a housed/rail unit. Confirm mating dimensions before treating related parts as a matched set.
Need a dimensional check or quote?
Send the model, quantity, interface dimensions and application.