Description
EP-KH
EVER POWER supplies this compact self-aligning linear bearings family for compact automation, semiconductor handling and instrumentation. Start the selection with shaft diameter, body length, alignment allowance and housing fit so the quotation is tied to the actual machine interface.
Nominal range: Ø6-Ø50 mm. Configuration: compact self-aligning bushings.
Technical profile
| Parameter | Value |
|---|---|
| Series identity | EP-KH |
| Nominal range | Ø6-Ø50 mm |
| Available configuration | compact self-aligning bushings |
| Mechanical interface | short cylindrical body; code reflects shaft size and length |
| Fit / tolerance note | self-alignment handles small error, not an unsuitable shaft or housing |
| Typical applications | compact automation, semiconductor handling and instrumentation |
| RFQ selection inputs | shaft diameter, body length, alignment allowance and housing fit |
Representative EP- models
The EP- prefix is the public sales identity used on this site; the engineering series code follows it for cross-reference.
| EP- model | Nominal family range | Configuration note |
|---|---|---|
| EP-KH-0622 | Ø6-Ø50 mm | compact self-aligning bushings |
| EP-KH-0824 | Ø6-Ø50 mm | compact self-aligning bushings |
| EP-KH-1026 | Ø6-Ø50 mm | compact self-aligning bushings |
| EP-KH-1228 | Ø6-Ø50 mm | compact self-aligning bushings |
| EP-KH-1630 | Ø6-Ø50 mm | compact self-aligning bushings |
| EP-KH-2030 | Ø6-Ø50 mm | compact self-aligning bushings |
| EP-KH-2540 | Ø6-Ø50 mm | compact self-aligning bushings |
| EP-KH-3050 | Ø6-Ø50 mm | compact self-aligning bushings |
| EP-KH-4060 | Ø6-Ø50 mm | compact self-aligning bushings |
| EP-KH-5070 | Ø6-Ø50 mm | compact self-aligning bushings |
Selection and replacement notes
self-alignment handles small error, not an unsuitable shaft or housing
For replacement work, send the old code plus a photo or dimensional sketch. For a new design, send motion duty, mounting envelope and the selection inputs above.
Dimensional reference
What to verify
Check the shaft or rail size first, then the mounting envelope. On flanged and housed products, bolt pattern and center height can be just as important as the nominal bore.
Related components
Common companions include precision linear shafts, shaft supports or a housed/rail unit. Confirm mating dimensions before treating related parts as a matched set.
Need a dimensional check or quote?
Send the model, quantity, interface dimensions and application.