Description
EP-SBR
EVER POWER supplies this support rail units family for CNC routers, long travel automation and cutting tables. Start the selection with shaft/rail diameter, block length, mounting holes and support geometry so the quotation is tied to the actual machine interface.
Nominal range: Ø10-Ø50 mm. Configuration: standard and long open-bearing support blocks.
Technical profile
| Parameter | Value |
|---|---|
| Series identity | EP-SBR |
| Nominal range | Ø10-Ø50 mm |
| Available configuration | standard and long open-bearing support blocks |
| Mechanical interface | open carriage running on supported round shaft |
| Fit / tolerance note | select the carriage and supported rail as one geometry |
| Typical applications | CNC routers, long travel automation and cutting tables |
| RFQ selection inputs | shaft/rail diameter, block length, mounting holes and support geometry |
Representative EP- models
The EP- prefix is the public sales identity used on this site; the engineering series code follows it for cross-reference.
| EP- model | Nominal family range | Configuration note |
|---|---|---|
| EP-SBR10UU | Ø10-Ø50 mm | standard and long open-bearing support blocks |
| EP-SBR12UU | Ø10-Ø50 mm | standard and long open-bearing support blocks |
| EP-SBR16UU | Ø10-Ø50 mm | standard and long open-bearing support blocks |
| EP-SBR20UU | Ø10-Ø50 mm | standard and long open-bearing support blocks |
| EP-SBR25UU | Ø10-Ø50 mm | standard and long open-bearing support blocks |
| EP-SBR30UU | Ø10-Ø50 mm | standard and long open-bearing support blocks |
| EP-SBR35UU | Ø10-Ø50 mm | standard and long open-bearing support blocks |
| EP-SBR40LUU | Ø10-Ø50 mm | standard and long open-bearing support blocks |
| EP-SBR50LUU | Ø10-Ø50 mm | standard and long open-bearing support blocks |
Selection and replacement notes
select the carriage and supported rail as one geometry
For replacement work, send the old code plus a photo or dimensional sketch. For a new design, send motion duty, mounting envelope and the selection inputs above.
Dimensional reference
What to verify
Check the shaft or rail size first, then the mounting envelope. On flanged and housed products, bolt pattern and center height can be just as important as the nominal bore.
Related components
Common companions include precision linear shafts, shaft supports or a housed/rail unit. Confirm mating dimensions before treating related parts as a matched set.
Need a dimensional check or quote?
Send the model, quantity, interface dimensions and application.
