Description
EP-LMES
EVER POWER supplies this stainless steel linear bearings family for food/pharma equipment, medical devices and humid environments. Start the selection with material confirmation, seals, shaft pairing and cleaning environment so the quotation is tied to the actual machine interface.
Nominal range: Ø10-Ø50 mm. Configuration: standard/open; sealed or unsealed by model.
Technical profile
| Parameter | Value |
|---|---|
| Series identity | EP-LMES |
| Nominal range | Ø10-Ø50 mm |
| Available configuration | standard/open; sealed or unsealed by model |
| Mechanical interface | stainless cylindrical bushing family |
| Fit / tolerance note | confirm exact material, seals, cleaning medium and shaft pairing |
| Typical applications | food/pharma equipment, medical devices and humid environments |
| RFQ selection inputs | material confirmation, seals, shaft pairing and cleaning environment |
Representative EP- models
The EP- prefix is the public sales identity used on this site; the engineering series code follows it for cross-reference.
| EP- model | Nominal family range | Configuration note |
|---|---|---|
| EP-LMES10 | Ø10-Ø50 mm | standard/open; sealed or unsealed by model |
| EP-LMES10UU | Ø10-Ø50 mm | standard/open; sealed or unsealed by model |
| EP-LMES12UU | Ø10-Ø50 mm | standard/open; sealed or unsealed by model |
| EP-LMES16UU | Ø10-Ø50 mm | standard/open; sealed or unsealed by model |
| EP-LMES20UU | Ø10-Ø50 mm | standard/open; sealed or unsealed by model |
| EP-LMES20OP | Ø10-Ø50 mm | standard/open; sealed or unsealed by model |
| EP-LMES25UU | Ø10-Ø50 mm | standard/open; sealed or unsealed by model |
| EP-LMES30UU | Ø10-Ø50 mm | standard/open; sealed or unsealed by model |
| EP-LMES40UU | Ø10-Ø50 mm | standard/open; sealed or unsealed by model |
| EP-LMES50UU | Ø10-Ø50 mm | standard/open; sealed or unsealed by model |
Selection and replacement notes
confirm exact material, seals, cleaning medium and shaft pairing
For replacement work, send the old code plus a photo or dimensional sketch. For a new design, send motion duty, mounting envelope and the selection inputs above.
Dimensional reference
What to verify
Check the shaft or rail size first, then the mounting envelope. On flanged and housed products, bolt pattern and center height can be just as important as the nominal bore.
Related components
Common companions include precision linear shafts, shaft supports or a housed/rail unit. Confirm mating dimensions before treating related parts as a matched set.
Need a dimensional check or quote?
Send the model, quantity, interface dimensions and application.
