China Zwz Cylindrical Roller Bearing Nj3226 X1 Made in China with Hot selling

Merchandise Description

ZWZ Cylindrical Roller Bearing NJ3226 X1 Made in China

The cylindrical roller bearings are separate. This kind of bearing simplifies mounting and dismounting and has heavy carrying capacity of radial loads.
 
We can supply many kinds of cylindrical roller bearings
Single row: N, NU, NJ, NF, NUP, NCF and NJG
Double row: NNU, NN, NNC, NNCF and NNCL.
Four rows:SL series
 
N: The inner ring has two integral flanges and the outer ring is without flanges. Axial displacement of the shaft with respect to the housing can be accommodated in both directions within the bearing itself. Pressed steel and machined brass cages and allowed.
 
NU: The outer ring has two integral flanges and the inner ring is without flanges. Axial displacement of the shaft with respect to the housing can be accommodated in both directions within the bearing itself. Pressed steel and the machined brass cages are allowed.
 
NJ: The outer ring has two integral flanges and the inner ring has only one integral flange. The bearings are therefore suitable for the axial location of a shaft in one direction. Pressed steel and machined brass cages are allowed.
 
NF: The inner ring has two integral flanges and the outer ring has only one integral flange. The bearings can locate a shaft axially in one direction. Pressed steel and machined brass cages are allowed.
 
NUP: The outer ring has two integral flanges and the inner ring has one integral flange with one separating as flange ring. The bearings can be used as locating bearings, i.e. They can provide axial location for a shaft in both directions.
 
Some part number of Cylindrical Roller Bearing for example:
 

Boundary dimensions(mm) Basic load ratings(kN) Limiting speeds(rpm) Mass(Kg) Bearing Number
d D B rs min rs1 min Cr Cor Grease Oil (Approx.) TML
20 forty seven fourteen 1 .six twenty five.7 22.six fifteen,000 18,000 .122 NU204E
twenty five 52 fifteen one .six 29.3 27.7 thirteen,000 15,000 .151 NU205E
thirty sixty two 16 1 .6 39 37.5 11,000 13,000 .226 NU206E
35 72 17 1.one .6 fifty.five 50 9,five hundred eleven,000 .327 NU207E
40 eighty 18 1.one 1.1 43.5 forty three 9,400 eleven,000 .378 NU208
forty five eighty five 19 one.one 1.one forty six 47 eight,four hundred 9,900 .432 NU209
45 eighty five 19 one.1 1.one 63 66.five seven,600 nine,000 .495 NU209E
50 90 twenty one.one one.one forty eight 51 seven,600 nine,000 .forty seven NU210
fifty 90 20 one.one 1.1 sixty six 72 six,900 eight,100 .54 NU210E
fifty five a hundred 21 one.5 one.1 58 62.5 6,900 eight,two hundred .638 NU211
sixty 110 22 one.5 1.five sixty eight.five 75 six,four hundred seven,600 .818 NU212
sixty five one hundred twenty 23 1.5 one.5 eighty four 94.5 five,900 seven,000 one.02 NU213
sixty five a hundred and twenty 23 1.5 one.5 108 119 5,400 6,300 1.21 NU213E
70 one hundred twenty five 24 1.five one.five eighty three.five 95 five,500 6,500 one.12 NU214
70 a hundred twenty five 24 one.five 1.5 119 137 five,000 five,900 one.three NU214E
seventy five a hundred thirty twenty five one.5 one.5 ninety six.5 111 5,100 6,000 one.23 NU215

 

NJ2320 100x215x73 410 505 2,900 3,400 eleven.7
NJ2320E 100x215x73 570 715 2,600 three,a hundred 12.eight
NJ2322 110x240x80 605 790 two,600 3,100 seventeen.1
NJ2322E 110x240x80 675 880 2,400 two,800 19.four
NJ2324 120x260x86 710 920 2,400 two,800 21.5
NJ2324E 120x260x86 795 1,030 2,200 2,500 26.1
NJ2326 130x280x93 840 1,130 2,two hundred 2,600 26.9
NJ2326E 130x280x93 920 one,230 two,000 two,three hundred 30.nine
NJ2328 140x300x100 920 one,250 two,000 two,three hundred 33.eight
NJ2328E 140x300x100 1,571 one,380 1,800 two,100 38.7

Workshop in our Manufacturing facility:

Contact Me:

 


/ Piece
|
1 Piece

(Min. Order)

###

Rolling Body: Roller Bearings
The Number of Rows: Single
Outer Dimension: Medium and Large(120-190mm)
Material: Bearing Steel
Spherical: Non-Aligning Bearings
Load Direction: Radial Bearing

###

Samples:
US$ 1/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

Boundary dimensions(mm) Basic load ratings(kN) Limiting speeds(rpm) Mass(Kg) Bearing Number
d D B rs min rs1 min Cr Cor Grease Oil (Approx.) TML
20 47 14 1 0.6 25.7 22.6 15,000 18,000 0.122 NU204E
25 52 15 1 0.6 29.3 27.7 13,000 15,000 0.151 NU205E
30 62 16 1 0.6 39 37.5 11,000 13,000 0.226 NU206E
35 72 17 1.1 0.6 50.5 50 9,500 11,000 0.327 NU207E
40 80 18 1.1 1.1 43.5 43 9,400 11,000 0.378 NU208
45 85 19 1.1 1.1 46 47 8,400 9,900 0.432 NU209
45 85 19 1.1 1.1 63 66.5 7,600 9,000 0.495 NU209E
50 90 20 1.1 1.1 48 51 7,600 9,000 0.47 NU210
50 90 20 1.1 1.1 66 72 6,900 8,100 0.54 NU210E
55 100 21 1.5 1.1 58 62.5 6,900 8,200 0.638 NU211
60 110 22 1.5 1.5 68.5 75 6,400 7,600 0.818 NU212
65 120 23 1.5 1.5 84 94.5 5,900 7,000 1.02 NU213
65 120 23 1.5 1.5 108 119 5,400 6,300 1.21 NU213E
70 125 24 1.5 1.5 83.5 95 5,500 6,500 1.12 NU214
70 125 24 1.5 1.5 119 137 5,000 5,900 1.3 NU214E
75 130 25 1.5 1.5 96.5 111 5,100 6,000 1.23 NU215

###

NJ2320 100x215x73 410 505 2,900 3,400 11.7
NJ2320E 100x215x73 570 715 2,600 3,100 12.8
NJ2322 110x240x80 605 790 2,600 3,100 17.1
NJ2322E 110x240x80 675 880 2,400 2,800 19.4
NJ2324 120x260x86 710 920 2,400 2,800 21.5
NJ2324E 120x260x86 795 1,030 2,200 2,500 26.1
NJ2326 130x280x93 840 1,130 2,200 2,600 26.9
NJ2326E 130x280x93 920 1,230 2,000 2,300 30.9
NJ2328 140x300x100 920 1,250 2,000 2,300 33.8
NJ2328E 140x300x100 1,020 1,380 1,800 2,100 38.7

/ Piece
|
1 Piece

(Min. Order)

###

Rolling Body: Roller Bearings
The Number of Rows: Single
Outer Dimension: Medium and Large(120-190mm)
Material: Bearing Steel
Spherical: Non-Aligning Bearings
Load Direction: Radial Bearing

###

Samples:
US$ 1/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

Boundary dimensions(mm) Basic load ratings(kN) Limiting speeds(rpm) Mass(Kg) Bearing Number
d D B rs min rs1 min Cr Cor Grease Oil (Approx.) TML
20 47 14 1 0.6 25.7 22.6 15,000 18,000 0.122 NU204E
25 52 15 1 0.6 29.3 27.7 13,000 15,000 0.151 NU205E
30 62 16 1 0.6 39 37.5 11,000 13,000 0.226 NU206E
35 72 17 1.1 0.6 50.5 50 9,500 11,000 0.327 NU207E
40 80 18 1.1 1.1 43.5 43 9,400 11,000 0.378 NU208
45 85 19 1.1 1.1 46 47 8,400 9,900 0.432 NU209
45 85 19 1.1 1.1 63 66.5 7,600 9,000 0.495 NU209E
50 90 20 1.1 1.1 48 51 7,600 9,000 0.47 NU210
50 90 20 1.1 1.1 66 72 6,900 8,100 0.54 NU210E
55 100 21 1.5 1.1 58 62.5 6,900 8,200 0.638 NU211
60 110 22 1.5 1.5 68.5 75 6,400 7,600 0.818 NU212
65 120 23 1.5 1.5 84 94.5 5,900 7,000 1.02 NU213
65 120 23 1.5 1.5 108 119 5,400 6,300 1.21 NU213E
70 125 24 1.5 1.5 83.5 95 5,500 6,500 1.12 NU214
70 125 24 1.5 1.5 119 137 5,000 5,900 1.3 NU214E
75 130 25 1.5 1.5 96.5 111 5,100 6,000 1.23 NU215

###

NJ2320 100x215x73 410 505 2,900 3,400 11.7
NJ2320E 100x215x73 570 715 2,600 3,100 12.8
NJ2322 110x240x80 605 790 2,600 3,100 17.1
NJ2322E 110x240x80 675 880 2,400 2,800 19.4
NJ2324 120x260x86 710 920 2,400 2,800 21.5
NJ2324E 120x260x86 795 1,030 2,200 2,500 26.1
NJ2326 130x280x93 840 1,130 2,200 2,600 26.9
NJ2326E 130x280x93 920 1,230 2,000 2,300 30.9
NJ2328 140x300x100 920 1,250 2,000 2,300 33.8
NJ2328E 140x300x100 1,020 1,380 1,800 2,100 38.7

Types of Ball Bearings

If you’re looking to purchase a new ball bearing, there are many different types available. Learn about Single-row designs, Ceramic hybrid bearings, and Self-aligning ball bearings. You can also choose from stainless steel or single-row designs. Then, read about the different types of materials available to you. You’ll have an easier time making a decision. After all, you won’t have to worry about maintaining your new ball bearing, since it will be maintained by your supplier.
bearing

Single-row designs

Ball bearings with a single-row design have a high load-carrying capacity. They are used in applications where high loads must be handled smoothly. A single-row design is a good choice when the material’s properties require high load-carrying capacity but limited axial load capability. Single-row designs use two bearings with similar design features, but they have different mounting methods. Single-row designs can be adjusted either against one another to accommodate axial loads.
The single-row design is suitable for high-speed applications, but also has some disadvantages. The contact angle a is the angle between the radial plane and contact line. The larger the angle, the higher the axial load carrying capacity of the bearing. Single-row angular contact ball bearings are suitable for higher axial forces. Single-row angular contact ball bearings have a single-row design and support high axial forces in one direction. Single-row ball bearings are available in both pressed steel and machined steel cages.
Angular contact ball bearings with a single row feature a cage made of fiber-glass reinforced polyamide 66. These are available in diameters up to 130 mm. Four-point angular contact ball bearings use brass, steel, or brass plate. They have good running properties and a low coefficient of linear expansion. Single-row designs are easy to mount and are widely available. Alternatively, they can be mounted with a universal match design, which allows them to be easily adjusted.
One-row angular contact ball bearings are generally not suitable for angular misalignments because they are unsuitable for compensation of angular misalignments. Misalignments cause internal forces in the bearing which reduce its radial load capacity and life expectancy. This type of bearing is not suitable for adjacent mounting as it increases the chances of misalignment. However, it is a suitable choice for applications where only one bearing is required per bearing position.

Ceramic hybrid bearings

While all-ceramic bearings are limited to very specialized applications, Si3N4-based hybrid bearings are finding use in a wide range of high-speed machines. Compared to steel, ceramics are less susceptible to centrifugal forces, which are directly proportional to the mass of the balls. Because Si3N4 replacement balls have a lower density than steel, these bearings reduce the stress placed on the outer race.
The benefits of hybrid bearings are clear: they allow for higher speeds and loads than full-ceramic bearings, and they require no lubrication. Because of their many benefits, many industrial equipment operators are switching to these innovative bearings. CBR is one company that specializes in ceramic hybrid bearings and can help you find the best product for your application. If you are thinking about purchasing ceramic bearings for your next machine, here are some things you need to know about them.
A ceramic ball bearing surface has an extremely low coefficient of friction, which is important for applications that require low friction and high speeds. Ceramic balls also have a higher hardness than steel balls, which increases their life. In addition to this, ceramic hybrid bearings have superior thermal properties, generating less heat even when spinning at high speeds. These properties make ceramic hybrid bearings an ideal choice for high-speed machinery, especially electric motors. They are also suitable for applications that operate under water.
A ceramic ball hybrid bearing is much less susceptible to temperature fluctuations and wear. Because they are essentially indestructible, ceramic balls do not generate wear particles from the adhesive wear. They can run at significantly higher speeds than steel balls. Ceramic balls are also more resistant to moisture. For this reason, grease is a recommended lubricant in most ceramic bearing applications. These lubricants offer superior protection against moisture and corrosion. Further, they are available in many types.
bearing

Self-aligning ball bearings

A self-aligning ball bearing is one type of self-aligning bearing. These bearings are recommended for use in flex shaft systems. Their self-aligning feature prevents them from misaligning when in use. They can be used in both single and multiple-joint systems. In addition to self-aligning ball bearings, these units also feature flex shafts.
These self-aligning ball bearings come in a variety of configurations, including cylindrical, round, tapered, and straight bore. Their inner ring is tapered to meet specific tolerances. They are suitable for operating temperatures ranging from -30°F to 120°F. Their wide range of applications allows them to be used in general machinery, precision instruments, and low noise motors. In addition, they are available in a variety of outside diameters, widths, and internal clearances.
Self-aligning ball bearings have two rows of balls and one common sphered raceway in the outer ring. This enables them to automatically compensate for angular misalignment, which may be caused by machining and assembly errors or deflections. Compared to spherical roller bearings, these self-aligning ball bearings generate less friction. They run cooler even at high speeds. Self-aligning ball bearings also offer free engineering support.
Self-aligning ball bearings are designed for difficult shaft alignment. They are double-row, self-retaining units, with cylindrical or tapered bores. These bearings are available in open and sealed designs, and can also be used in applications with misalignment. They are also available with an outer ring that rotates in relation to the inner ring. When it comes to shaft misalignment, self-aligning ball bearings are a great solution.

Stainless steel

Stainless steel is a metal that resists corrosion and is highly durable. Its corrosion-resistant and water-resistance properties make it a good choice for bearings in food and marine applications. Additionally, stainless steel has hygienic benefits. Here are some of the benefits of stainless steel ball bearings. Read on to learn more about these amazing bearings! We’ve included some of the most common uses for stainless steel.
Hardness is important in a ball bearing. Steel uses the Rockwell C scale to measure hardness. A grade 25 steel ball bearing is accurate to 25 millionths of an inch, while a grade five ceramic bearing is less than a half-inch round. Although roundness is important, it shouldn’t be overemphasized, as the bearing surfaces may not be as accurate as the grade of the metal. And remember, a higher price tag doesn’t mean a better product.
Stainless steel ball bearings are available in a variety of alloys. The alloys used in manufacturing a stainless steel ball bearing vary in hardness, strength, and ductility. Stainless steel ball bearings have high corrosion-resistance properties. Additionally, they have long lubrication lives. These benefits make them a popular choice for industrial applications. These bearings are easy to maintain, reduce replacement costs, and offer corrosion resistance.
The NTN Sentinel Series is a premium line of stainless steel bearings. The solid lube is NSF H1 registered and prevents grease from leaching into food. It is also corrosion-resistant and doesn’t need to be coated. The seals and slinger create a water-resistant barrier between the steel ball and the lubricant. It also adds safety and security to the bearing.
bearing

Plastic balls

For applications where noise and weight are major concerns, plastic balls are ideal. These non-magnetic balls are ideal for MRI X-ray machines and sensors. They are also easy to lubricate, and are non-magnetic. A polymer ball bearing is the lightest of all three types. This makes them a good choice for many industries. Read on to learn more. This article will introduce some of the advantages of plastic balls for ball bearings.
Although ceramic ball bearings are more durable and offer many advantages, they are more expensive than plastic. Fortunately, plastic ball bearings offer a cheaper alternative. These bearings feature all-plastic races and cages. Depending on the application, plastic balls can be used in applications involving chemicals. In these cases, plastic ball bearings are available with a C160 grade, which is safe for use in temperatures below 176 deg F.
Medical devices often require precision specialty balls, which are made of glass, stainless steel, and plastic. These bearings must meet stringent cleanliness requirements. To meet the most stringent requirements, they must undergo ultrasonic cleaning. These bearings are available in plastic raceways, and are also available with glass or stainless steel balls. Polyethylene balls are lightweight and can be used in a variety of applications. They can be ordered in different sizes and tolerances to meet specific requirements.
Plastic balls for ball bearings are often mounted into other parts, such as plastic wheels, pulleys, and housings. They can be seamlessly integrated into other parts of a machine, which reduces assembly time and improves affordability. One important advantage of plastic bearings is that they are rust-resistant. As such, they can be used in harsh environments without causing any damage. If a piece of equipment is exposed to extreme temperatures, polymers are the ideal choice.

China Zwz Cylindrical Roller Bearing Nj3226 X1 Made in China     with Hot sellingChina Zwz Cylindrical Roller Bearing Nj3226 X1 Made in China     with Hot selling
editor by CX 2023-04-03